COPYRIGHT

3D Wall Panels™ designs, marketing materials, including website design, pages, documents and online graphics, are the sole property of 3D Wall Panels™ and are protected under applicable copyrights, trademarks and other proprietary (including but not limited to intellectual property) rights. Copyright of 3D Wall Panels™ materials resides with 3D Wall Panels™. Apart from any fair dealing for the purposes of study, research and review, as permitted under copyright legislation, no part of these services may be reproduced, re-used or redistributed for any purpose whatsoever, or distributed to a third party for such purpose, without written permission from the management of 3D Wall Panels™. The photograph "Vision office Artarmon Waves design.JPG" was taken by Chinny Buraga.


DISCLAIMER

Due to the hand sanding required to finish 3D wall panels, grooves on the finished panels may have a slight non uniform appearance. Sculpting of the MDF panels may cause the panels to bow. This is normal and can be rectified by correct installation. Much care needs to be taken when storing, transporting and handling the panels. They should be wrapped in protective foam and stored with the machined side adjacent to the back of the following panel. Do not store or transport panels face to face as the sculpting may be damaged. 3D Wall Panels™ does not warrant against damage from storage.

Colour and other variations in raw MDF base material
MDF is made from recycled forest products therefore raw unfinished wall panels will have natural variations in colour and fibre.  We cannot guarantee a colour match of raw boards. This is why we do not recommend clear lacquering as a finish for the panels. Staining of the panels, especially in light colours may also result in slight colour differences between panels. The machined boards will vary in their degree of furriness i.e. the texture of the surface after the board has been machined. This is the result of the use of natural recycled materials in the manufacture of the raw boards. The use of MDF primer and a sufficient degree of sanding and preparation prior to painting and between coats will determine the ultimate finish of the panels.

Thermo-laminated wood grain and timber veneer finishes
When choosing a wood grain thermo-laminated wood grain or timber veneer finish, it is important to note that the direction of the grain will always run in the long direction of the panel. As not all designs are suitable, please contact 3D Wall Panels prior to specifying these types of finish.

Painted finishes
To achieve the best results on MDF base materials, the use of a reputable spray paint professional is recommended. The use of an MDF primer and sufficient sanding between coats and prior to the final finishing coats being applied will help to ensure a smooth surface. Always use paint as per the manufacturer's instructions.


TERMS AND CONDITIONS

Full prepayment is required to commence an order. As all products are custom made, an order cannot be cancelled once production begins.  If the order is cancelled prior to production a 10% charge applies which will be deducted from the payment to cover costs incurred.

Immediately upon delivery, the customer must inspect all goods prior to signing the delivery docket or tax invoice to ascertain that there is no damage to the panels. Damage due to mishandling or stacking of the panels or packaging material during transport is freight damage and not the responsibility of 3D Wall Panels™. If damage is found, the purchaser must sign for the freight as damaged and the driver must acknowledge that the purchaser is signing for damaged freight. It is the responsibility of the purchaser to file any freight claims resulting from this process. 3D Wall Panels™ has no liability after the goods are despatched from its premises.

The buyer hereby waives all statutory warranties and all warranties implied by law in connection with the sale of the panels, and agrees that the only warranties made by and binding upon 3D Wall Panels™ is that 3D Wall Panels™ warrants its goods for one year (365 days) from the date of purchase by the buyer against any defects in workmanship in the goods. Any damages for any defect is limited to repair or replacement of the defective panels at the discretion of the management of 3D Wall Panels™. 3D Wall Panels™ will not be responsible for coating or finishing done by a third party which is not included on our tax invoice. Wear and tear of the panels is not covered by any warranty.

Otherwise, 3D Wall Panels™ in no manner warrants the fitness of its goods for any particular purpose for which the buyer intends to use them. The buyer assumes all risks associated with the panels and the use thereof.