3D wall panels™ are available raw (unfinished) or in a choice of finishes. The following are some suggestions for finishing your panels. See examples of the finishes mentioned below in our portfolio.
Thermo-laminated Vinyl Finish
A decorative vinyl coating is pressed onto the panel giving it superior durability and great visual impact. On full sized panels, one long or one short exposed edge may be vinyl wrapped on request. Inside edges generally, are not wrapped to allow for a more seamless look between adjoining panels. Panels at least 100mm smaller in height and width than 2400 x 1200mm may have all edges wrapped. Panels over 2400mm high are not available in this finish.
See www.bonlex.com.au or www.decofoils for vinyl colour ranges or to order colour samples. At the Bonlex site, click on 'Bonlex' then 'the colour pallette' or 'order samples'. At the Decofoils site, click on 'Products' then 'Select range'.
•
A large variety of plain colours, metallics and wood grain patterns in matt or high gloss finishes
•
Smooth or textured surface finish
•
Hard wearing and scratch resistant
•
Cost effective
3D Wall Panels™ are applicators of this type of finish. Call us on (02) 9725 4222 for a quote.
Polyurethane or Hand Painted
Polyurethane paint provides a superior finish for 3D wall panels. It can be applied by your local spray painter or available through 3D Wall Panels™ on (02) 9725 4222. For those who prefer to do it yourself, an MDF primer coat is recommended, followed by 2 coats of acrylic paint, applied as per the manufacturers guidelines, with plenty of sanding between coats.
•
Unlimited colour selection
•
Satin or high gloss finishes
•
Specialised finishes such as metallic and pearl
•
Attractive and durable
Stain and Lacquer
Panels may be stained in various shades and lacquered for a timber-like finish. For best results a professional french polisher is recommended. Note that as MDF is made from recycled forest products, the colour of the raw boards may vary, which may result in variances in colour of the finished panels.
Contact 3D Wall Panels™ on (02) 9725 4222 for more information or a quote.
INTERIOR AND EXTERIOR FINISH
Iron, Copper, Aluminium, Graphite and other Metal Finishes
Metal filings are applied to the surface of the panels and then oxidised to look aged. A top coat of sealer prevents further oxidisation of the metal and protects against scuffing.
•
Each panel is an original with its own subtly different markings
•
A genuine metal, textured finish
•
Available in iron rust, aluminium, brass, bronze, copper, graphite, nickel and many other metals
Contact 3D Wall Panels™ on (02) 9725 4222 for more information or a quote.
80 Redfern Street
WETHERILL PARK NSW 2164 Australia
