Name: Logs 100mm
Availability: InStock

This design instantly creates that rustic, log, cabin look. Great for a masculine feel, ideal for a bar or man cave. Made in 25mm thickness.

Buy Raw Finish Logs 100mm Panels Here

MATERIAL Select the material.More Information	Indoors Australian made 25mm E0 highly moisture resistant (MR) medium density fibreboard (MDF) Outdoors 18mm polymer is waterproof, light weight, self extinguishing, mould and pest resistant.
Finish
Material
Thickness
Size
Orientation
ORIENTATION Select which direction the pattern should run on the panel.	Orientation A Orientation B
INSTALLATION Select the way the panels will be installed.	Portrait Landscape
Quantity	Quantity
	Quick Quote

Sizes available:

2400 x 1200mm
2700 x 1200mm (indoor panels only)
3600 x 1200mm (indoor panels only)
For panels cut to other sizes, please fill in our Quick Quote form.

Raw material:

Indoor panels – moisture resistant MDF
Outdoor panels – waterproof polymer

Thickness of raw material:

18mm – standard thickness for most designs
25mm – standard thickness for some designs or optional if using panels to make doors (conditions apply – indoor panels only)

Finish:

Raw finish for DIY painting
Spray painted in polyurethane (2 pac) paint (indoor panels only)

Lead times:

Raw finish – approximately 5 working days plus delivery
Painted finish – approximately 15 working days plus delivery

Installation:

See our Installation Guide for details.

Australian made:

3D Wall Panels are manufactured in Australia and delivered Australia wide.

For more information:

Visit the Product Information page.

Logs at Tea Macchiato

Location: Tea Macchiato

Installer: Master Planners

Logs at Magic Millions 2019

Location: Magic Millions

Designer: Kat and Co

Curved Logs 100mm Wall

Location: Central Coast

Installer: Construct Central Coast

To achieve this look, John applied two layers of plywood to the curved surface, then trimmed down the 25mm panels to their thinnest point (where the logs meet). His team then lightly sprayed the MDF with water every 5 minutes for 1 hour to give the panels more flex. When the panels were ready, the whole wall was lathered with glue and then starting from one end, screwed onto the wall.